Whatever you have, we will work with you to make sure your investment is protected by the best solution. When it comes to our Spray-On Bed Liners, we offer the highest quality products and workmanship.
We are not your typical organization, and will look to fill your needs. When others say it cannot be done, we will consult with certified technical experts in your industry to make sure that our application will last well beyond the expected life of the substrate.
Maybe you place things in your truck bed, or possibly you are looking to outfit your commercial vehicle, how about bullet proofing your bumpers on your off road vehicle. I have sprayed a sinking boat and made it float!
Benefits of Spray-in Bedliners:
We will apply a protective masking to ensure that your vehicle is protected from any bed liner overspray. Once that protection is installed, we proceed with the actual material spray coating:
- The area to be installed is sanded thoroughly and cleaned
- An adhesive primer is applied when needed
- Only then is the actual spray bed liner installed
- The masking is then removed
- Although the product dries immediately, we recommend a24 hour "Curing" time before heavy use
FREQUENLY ASKED QUESTIONS:
How long does it take?
About three hours start to finish. Typically, you can drop it off in the morning and pick up later that same afternoon.
When can I use my vehicle?
That day but a 24 hour curing time is recommended before heavy use
What about the drain holes in my truck bed?
Yes one of the advantages of a spray on bed liner over a plastic drop in bed liner is that it maintains your truck’s factory designed drainage system.
How much does it cost?
Depending on your specific requirements prices range from $450 to $550. To get an individualized quote call 412-283-0106 or click here to email your information.
Does Pittsburgh Protective Coatings Warranty their work?
Yes, PPC warranties our work for the life of the vehicle.
PPC has done over 4,000 vehicles and we stand behind each and every one
What other applications can your coat?
Our products can be applied to virtually any properly prepared surface for durable and long-lasting protection. Grille guards and bumpers, rocker panels, fender flares, floor wells, boat decks and boat hulls are just some examples. They can also be used on trailers, ATVs, tractors, watercraft and anything else that will benefit from outstanding protection and corrosion resistance.
Can Pittsburgh Protective Coatings’ Spray in Bed Liner be removed?
After application there is virtually no way to remove our bed liner. Our bed liner performs so well that you will never want to remove it anyhow.
How do various chemicals react with the PPC Bed Liner?
Our bed liners are chemical resistant but we recommend rinsing to prevent possible staining.